ENGLISH (Original instructions) INSTRUCTION MANUAL Impact Wrench 6905B 6906 005305 DOUBLE INSULATION IMPORTANT: Read Before Using.
ENGLISH (Original instructions) SPECIFICATIONS Model Capacities 6905B 6906 Standard bolt M12 - M20 M16 - M22 High tensile bolt M12 - M16 M16 - M20 Square drive 12.7 mm 19 mm No load speed (min-1) 1,700 1,700 Impacts per minute 2,000 1,600 Max. fastening torque 294 N.m 588 N.m Overall length 270 mm 327 mm Net weight 2.8 kg 5.6 kg Safety class /II /II • Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• • Save all warnings and instructions for future reference. WARNING: The vibration emission during actual use of the power tool can differ from the declared emission value depending on the ways in which the tool is used.
23. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. 24. Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. Service 25.
inconsistent fastening torque and/or damage to the bolt or nut. FUNCTIONAL DESCRIPTION • Installing or removing socket CAUTION: Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. 1. Socket 2. Anvil 1 2 Switch action 1. Switch trigger 002338 1 1. 2. 002312 CAUTION: • Before plugging in the tool, always check to see that the switch trigger actuates properly and returns to the "OFF" position when released.
5. The manner of holding the tool or the material of driving position to be fastened will affect the torque. MAINTENANCE N.m (kg.cm) 700 (7140) 600 (6120) Rated voltage • For 6906 500 (5100) 90% of rated voltage 400 (4080) Rated voltage For 6905B 300 (3060) 200 (2040) • 90% of rated voltage 100 (1020) 0 1 2 3 4 5 6 7 8 (S) CAUTION: Always be sure that the tool is switched off and unplugged before attempting to perform inspection or maintenance.
ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center.
Makita Corporation Anjo, Aichi, Japan 883054E226 8 www.makita.