User Manual
How
to
use
0
Switch operation
The switch
is
reversible, providing either
clockwise or counterclockwise rotation.
Pulling the lower part of the trigger puts
the wrench on in the clockwise direction.
Pulling the upper part
of
the trigger puts
the tool on in the counterclockwise direc-
tion. Simply releasing either end of the
trigger turns the tool off.
Warning:
It
is
dangerous and injurious to the tool to reverse the rotation by rapid
switching without waiting for the motor to stop. Put the tool off, then wait
for complete stop before switching direction of rotation.
0
Installation the side grip
Fit
the side grip into the groove on the
middle of the hammer case and fasten
securely.
Fig.
2
e
Attaching the socket
Selecting
a
proper socket in
size,
please
insert
it
into the anvil
so
as
to fix securely.
4