Instruction manual

Installing side grip (auxiliary handle)
Always install the side grip on the machine
securely before operation. The side grip can
be installed in any of three positions on the
sides of the machine, whichever is con-
venient and keeps the guard properly posi-
tioned. Always hold the machine's switch
handle and the side grip firmly with both
hands during operation.
Switch handle mounting positions
The switch handle can be rotated to either
90° left or right to fit your work needs. To
change the position, first unplug the machine
from the power source. Remove only the
screw which secures the middle of the
switch handle Rotate the switch handle to
the desired angle
(90° left or right). Insert
the screw into the hole in the middle of the
switch handle. Make sure that the switch
handle is secured and then tighten the screw
firmly.
L Side grip
Screw
WARNING:
Position switch handle mounting angle and side grip only in such a way that grinding wheel
will not contact any part of your body and that wheel guard always remains positioned
as
a barrier between the grinding wheel and the operator. Failure to do so may result in
serious injury.
CAUTION:
Never mount the switch handle
at any other angles than Oo (original mounting angle), 90°
left of right. Reposition the side grip if necessary to assure firm and proper control of the
machine.
6