9045B/N (g-Cover) (’100. 7.
9045B/N (g-Cover) (’100. 8. 2) SPECIFICATIONS Model 9045B Pad size ........................................................................ 114 x 234 mm Orbits per minute .......................................................... 10,000 Overall length ................................................................ 240 mm Net weight ..................................................................... 2.6 kg 9045N 114 x 234 mm 10,000 268 mm 2.
9045B/N (illust) (’100. 7.
9045B/9045N (Eng) (’100. 7. 18) ENGLISH Explanation of general view 1 2 3 4 5 Base 6 Dust bag 7 Slide switch Frame cover Push button Clamper Abrasive paper 8 Limit mark 9 Brush holder cap 0 Screwdriver SAFETY INSTRUCTIONS 13. Don’t overreach Keep proper footing and balance at all times. 14. Maintain tools with care Keep tools sharp and clean for better and safer performance. Follow instructions for lubricating and changing accessories.
9045B/9045N (Eng) (’100. 7. 18) ADDITIONAL SAFETY RULES Switch action (Fig. 4) To start the tool, move the slide switch forward. Move it backward to stop. 1. Hold the tool firmly. 2. Do not leave the tool running. Operate the tool only when hand-held. 3. This tool has not been waterproofed, so do not use water on the workpiece surface. Operation (Fig. 5) Hold the tool firmly. Turn the tool on and wait until it attains full speed. Then gently place the tool on the workpiece surface.
9045B/9045N (Eng) (’100. 7. 21) ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. The accessories or attachments should be used only in the proper and intended manner.
9045B/9045N (Eng) (’100. 7. 21) UK only DOUBLE INSULATION THE ADDITIONAL COMMENT OF ELECTRICAL CONNECTION The tool is double insulated for safety, no earth connection is required. CAUTION: The tool must be connected to a plug having a rated current greater than that of tool. The rated voltage and current appear on the name plate. IMPORTANT: The wires in the mains lead are coloured in accordance with the following code.
9045B/9045N (Eng) ('100. 7.