ENGLISH (Original instructions) INSTRUCTION MANUAL Orbital Sander 9046 003270 DOUBLE INSULATION IMPORTANT: Read Before Using.
ENGLISH (Original instructions) SPECIFICATIONS Model 9046 Pad size 115 mm x 229 mm Abrasive paper size 115 mm x 280 mm Orbits per minute (min-1) 6,000 Overall length 283 mm Net weight 3.1 kg Safety class /II • Due to our continuing program of research and development, the specifications herein are subject to change without notice. • Specifications may differ from country to country.
ENH101-16 3. Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control. Electrical safety 4. Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock. 5. Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators.
27. 15. Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. 16. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. 17. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used.
original position to secure the paper. Repeat the same process for the other end of the tool, maintaining the proper paper tension. FUNCTIONAL DESCRIPTION • CAUTION: Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. 1 2 Switch action 1 2 1. Lock button 2. Switch trigger 1. Conventional type of abrasive paper 2. Clamp lever 3.
dust bag clockwise to secure it in place. For the best results, empty the dust bag when it becomes approximately half full, tapping it lightly to remove as much dust as possible. To remove the dust bag, follow the installation procedures in reverse. Installing paper dust bag (optional accessory) 2 1. Groove 2. Front fixing cardboard 3. Front side of paper dust bag 1 003745 NOTE: • If you connect a Makita dust collector to this tool, more efficient and cleaner operations can be performed.
OPTIONAL ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center.
Makita Corporation Anjo, Aichi, Japan 883989G221 8 www.makita.