ENGLISH Belt Sander MODEL 9901 MODEL 9924DB MODEL 9401 MODEL 9402 003360 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
SPECIFICATIONS Model 9401 Belt size Belt speed 9402 100 mm x 610 mm H 5.8 m/s L 5.0 m/s 5.8 m/s 9901 9924DB 76 mm x 533 mm 76 mm x 610 mm 6.3 m/s 6.6 m/s Overall length 374 mm 328 mm 355 mm Net weight 7.3 kg 3.5 kg 4.8 kg Safety class /II • Due to our continuing programme of research and development, the specifications herein are subject to change without notice. • Note: Specifications may differ from country to country.
EC-DECLARATION OF CONFORMITY We declare under our sole responsibility that this product is in compliance with the following standards of standardized documents, EN60745, EN55014, EN61000 in accordance with Council Directives, 89/336/EEC, 98/37/ EC. Yasuhiko Kanzaki CE 2005 MAKITA INTERNATIONAL EUROPE LTD. Michigan Drive, Tongwell, Milton Keynes, Bucks MK15 8JD, ENGLAND Responsible manufacturer: Makita Corporation Anjo Aichi Japan Director GENERAL SAFETY RULES GEA001-3 WARNING: Read all instructions.
attached to a rotating part of the power tool may result in personal injury. 24. Follow instruction for lubricating and changing accessories. 13. Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. 25. Keep handles dry, clean and free from oil and grease. 14. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing, and gloves away from moving parts.
FUNCTIONAL DESCRIPTION • 003365 1 CAUTION: Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. Switch action CAUTION: Before plugging in the tool, always check to see that the switch trigger actuates properly and returns to the “OFF” position when released. To start the tool, simply pull the switch trigger. Release the switch trigger to stop. For continuous operation, pull the switch trigger and then push in the lock button.
003377 • 003381 CAUTION: When installing the belt, make sure that the direction of the arrow on the back of the belt corresponds to the one on the tool itself. Adjusting belt tracking While the belt is running, use the adjusting knob to center the belt tracking. Failure to do so can result in frayed belt edges and wear on the sander frame. 1 1. Adjusting knob 003386 1 2 Dust bag The use of the dust bag makes sanding operations clean and dust collection easy.
MAINTENANCE • 001145 CAUTION: Always be sure that the tool is switched off and unplugged before attempting to perform inspection or maintenance. Replacing carbon brushes Remove and check the carbon brushes regularly. Replace them when they are worn down to the limit mark. Keep the carbon brushes clean and free to slip in the holders. Both carbon brushes should be replaced at the same time. Use only identical carbon brushes. 1 1. Limit mark 003397 Use a screwdriver to remove the brush holder caps.
Makita Corporation Anjo, Aichi, Japan 883836D226
