ENGLISH (Original instructions) INSTRUCTION MANUAL Belt Sander 9901 9924DB 9401 9402 003360 DOUBLE INSULATION WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
ENGLISH SPECIFICATIONS Model 9401 Belt size 9402 100 mm x 610 mm Belt speed 9901 9924DB 76 mm x 533 mm 76 mm x 610 mm 6.3 m/s 6.6 m/s H 5.8 m/s L 5.0 m/s 5.8 m/s Overall length 374 mm 328 mm 355 mm Net weight 7.4 kg 3.3 kg 4.8 kg Safety class /II • Due to our continuing programme of research and development, the specifications herein are subject to change without notice. • Specifications may differ from country to country.
GEA005-3 For Model 9924DB ENG102-3 General Power Tool Safety Warnings Noise The typical A-weighted noise level determined according to EN60745: Sound pressure level (LpA) : 91 dB(A) Sound power level (LWA) : 102 dB(A) Uncertainty (K) : 3 dB(A) Wear ear protection WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
dangerous in the hands of untrained users. Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. 23. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. 24.
SAVE THESE INSTRUCTIONS. To change the tool speed, press the "H" side of the speed change switch for high speed, or the "L" side for low speed. WARNING: DO NOT let comfort or familiarity with product (gained from repeated use) replace strict adherence to safety rules for the subject product. MISUSE or failure to follow the safety rules stated in this instruction manual may cause serious personal injury.
MAINTENANCE While the belt is running, use the adjusting knob to center the belt tracking. Failure to do so can result in frayed belt edges and wear on the sander frame. • Dust bag 1 1. Dust spout 2. Dust bag CAUTION: Always be sure that the tool is switched off and unplugged before attempting to perform inspection or maintenance. Replacing carbon brushes 2 1. Limit mark 003386 1 The use of the dust bag makes sanding operations clean and dust collection easy.
If you need any assistance for more details regarding these accessories, ask your local Makita Service Center.
Makita Corporation Anjo, Aichi, Japan 883836E226 8