Operation Manual

8
NOTE:
• Some items in the list may be included in the tool
package as standard accessories. They may differ
from country to country.
* Even if the sound pressure level listed above is 80 dB (A) or less, the level under working may exceed 80 dB (A). Wear
ear protection.
ENG901-1
• The declared vibration emission value has been
measured in accordance with the standard test method
and may be used for comparing one tool with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
• The vibration emission during actual use of the power
tool can differ from the declared emission value
depending on the ways in which the tool is used.
• Be sure to identify safety measures to protect the
operator that are based on an estimation of exposure in
the actual conditions of use (taking account of all parts
of the operating cycle such as the times when the tool
is switched off and when it is running idle in addition to
the trigger time).
Vibration Left handle (Front grip) Right handle (Rear grip)
Applicable
standard
Attachment a
h
(m/s
2
)
Uncertainty K
(m/s
2
)
a
h
(m/s
2
)
Uncertainty K
(m/s
2
)
BC-AC (as a brushcutter) 2.5 1.5 2.5 1.5 EN11806
BC-AC (as a string trimmer) 4.0 1.5 2.5 1.5 EN786
HT-CS 3.5 1.5 2.5 1.5 ISO10517
HT-CS + SE-CS 3.0 2.0 2.5 2.0 ISO10517
PS-CS 2.5 1.5 2.5 1.5 ISO11680
PS-CS + SE-CS 2.5 2.0 2.5 2.0 ISO11680
PS-CS 1 2.5 2.0 2.5 2.0 ISO11680
PS-CS 1 + SE-CS 2.5 2.0 2.5 2.0 ISO11680
CH-CS 3.5 1.5 3.0 1.5 ISO10517
CH-CS + SE-CS 2.5 2.0 2.6 2.0 ISO10517
MC-CS 2.5 1.5 2.5 1.5 EN709
Noise Sound pressure level average Sound power level average
Applicable
standard
Attachment L
PA
(dB (A))
Uncertainty K
(dB (A))
L
WA
(dB (A))
Uncertainty K
(dB (A))
BC-AC (as a brushcutter) 80.1 2.5 93.5 2.5 EN11806
BC-AC (as a string trimmer) 78.6 2.5 91.7 2.5 EN786
HT-CS 86.0 2.5 94.8 2.5 ISO10517
HT-CS + SE-CS 81.8 3.0 97.3 3.0 ISO10517
PS-CS 91.9 2.5 100.9 2.5 ISO11680
PS-CS + SE-CS 88.8 2.5 102.9 2.5 ISO11680
PS-CS 1 93.6 2.5 101.9 2.5 ISO11680
PS-CS 1 + SE-CS 90.3 2.5 104.4 2.5 ISO11680
CH-CS 78.2 2.5 87.1 2.5 ISO10517
CH-CS + SE-CS 81.9 2.5 95.2 2.5 ISO10517
MC-CS 78.8 2.5 88.3 2.5 EN709
Approved attachment Model
Brushcutter attachment BC-AC
Hedge trimmer attachment HT-CS
Pole saw attachment PS-CS, PS-CS 1
Coffee harvester attachment CH-CS
Cultivator attachment MC-CS
Shaft extension attachment SE-CS