Operators Manual

2
SPECIFICATIONS
• Due to our continuing programme of research and development, the specifications herein are subject to change
without notice.
• Note: Specifications may differ from country to country.
Symbols
END101-1
The following show the symbols used for the tool. Be
sure that you understand their meaning before use.
...................Read instruction manual.
.....................Wear safety glasses.
Intended use
The tool is intended for preliminary-work-nailing and fix-
ture-fastening with individual non-connected nails.
For European countries only
Noise and Vibration
The typical A-weighted noise levels are
sound pressure level: 93 dB (A)
sound power level: 106 dB (A)
– Wear ear protection. –
The typical weighted root mean square acceleration
value is 18 m/s
2
.
EC-DECLARATION OF CONFORMITY
We declare under our sole responsibility that this product
is in compliance with the following standards of stand-
ardized documents, EN792 in accordance with Council
Directives, 98/37/EC,
Yasuhiko Kanzaki CE 2004
Director
MAKITA INTERNATIONAL EUROPE LTD.
Michigan Drive, Tongwell, Milton Keynes, Bucks MK15
8JD, ENGLAND
Model AG125
Air pressure 0.44 - 0.83 Mpa (4.4 - 8.3 bar)
Nail Iength 75 mm - 125 mm
Diameter of nail head 7.5 - 11.0 mm
Over length 260 mm
Min. hose diameter 6.5mm
Pneumatic tool oil Turbine oil
Net weight 1.3 kg