Specifications

13
When the tool is not to be used for an extended period of
time, lubricate the tool using pneumatic tool oil and store the
tool in a safe place. Avoid exposure to direct sunlight and/or
humid or hot environment.
Maintenance of compressor, air set and air hose
After operation, always drain the compressor tank and the air
filter. If moisture is allowed to enter the tool, It may result in
poor performance and possible tool failure.
Check regularly to see if there is sufficient pneumatic oil in
the oiler of the air set. Failure to maintain sufficient lubrica-
tion will cause O-rings to wear quickly.
005640
005641
1. Drain cock
1. Air filter
1
004317
1
004318
1. Oiler
2. Pneumatic oil
1
2
004319