Instruction manual
Operation
1)To
drive
a
nail, you may place the contact arm
2)
Pull the trigger first and then place the contact arm
No,
1
method is for intermittent nailing, when you
wish to drive
a
nail carefully and very accurately.
No.
2
method is for continuous nailing.
against the workpiece and pull the trigger,
or
against the workpiece.
I
Trigger
When the nailer becomes jammed, do
as
follows:
First, disconnect the air hose. Remove the strip of
nails. Insert
a
small rod or the like into the ejection
port and tap
it
with
a
hammer to retract the driver.
Use pliers to bend the jammed nail
so
that the nail
head comes out
of
the slot in the driver guide. Then
remove the jammed nail.
I
._
Contact arm
I
1
Workpiece
I
1
Workpiece
Hammer