Instruction manual

MAINTENANCE
CAUTION:
Always be sure that the air hose is disconnected from the tool before attempting to perform
inspection or maintenance
Maintenance of nailer
Always check the tool for its overall condition and
loose screws before operation. Tighten
as required.
Make sure
all safety systems are in working order
before operation. The tool must not operate if only the
trigger is pulled or if only the contact arm
is pressed
against the wood. It must work only when both actions
are performed. Test for possible faulty operation with
nails unloaded and with the pusher locked
at fully
pulled position.
Pusher
When not using the tool for a long period, coat metal
parts lightly with machine oil to prevent rust. Avoid
storing the tool in
a very humid or hot place or place
exposed to direct sunlight.
I
Pusher