Specifications

9
Jammed nailer
CAUTION:
• Always lock the trigger, disconnect the hose and remove the nails from
the magazine before cleaning a jam.
When the nailer becomes jammed, do as follows:
Open the door and magazine cap and remove the nail coil. Insert a small rod
or the like into the ejection port and tap it with a hammer to drive out the nail
jamming from the ejection port. Reset the nail coil and close the magazine cap
and door.
Hook
The hook is convenient for hanging the tool temporarily. This hook can be
installed on either side of the tool.
CAUTION:
• Always lock the trigger and disconnect the hose when hanging the tool
using the hook.
• Always tighten the hook securing bolt firmly. Loose bolt may cause air
leakage from the tool.
• Never hang the tool on a waist belt or like. Dangerous accidental firing
may result.
Nails
Handle nail coils and their box carefully. If the nail coils have been handled
roughly, they may be out of shape or their connector breaks, causing poor nail
feed.
Avoid storing nails in a very humid or hot place or place exposed to direct sun-
light.
1. Small rod
2. Ejection port
1
2
005473
1. Hook
1
005474
005475
004310
005382