Operation Manual

13 ENGLISH
Removing jammed nails
CAUTION: Always lock the trigger by turning
the trigger lock lever to the lock position , and
disconnect the hose before removing jammed
nails. Also remove the nails from the magazine
before cleaning a jam.
1. Depress the latch lever and open the door. Open
the magazine cap and remove the nail coil.
2. Insertasmallmetalrodintothenailejectionport
and hit it with a hammer lightly.
►Fig.29: 1. Metal rod 2.Nailejectionport3. Hammer
3. Removethejammednailwithaat-bladescrew-
driver or other similar tool.
►Fig.30
4. Reset the nail coil and close the magazine cap
and the door.
MAINTENANCE
CAUTION: Before attempting to perform
inspection or maintenance, always lock the trig-
ger by turning the trigger lock lever to the lock
position , and disconnect the air hose from the
tool.
NOTICE: Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
Cleaning of tool
Irondustthatadheretothemagnetcanbeblownoffby
using an air duster.
►Fig.31: 1. Magnet
Storage
Whennotinuse,disconnectthehose.Thencaptheair
ttingwiththecap.Storethenailerinawarmanddry
place.
►Fig.32: 1.Cap
Maintenance of compressor, air set
and air hose
Afteroperation,alwaysdrainthecompressortankand
theairlter.Ifmoistureisallowedtoenterthetool,
itmayresultinpoorperformanceandpossibletool
failure.
►Fig.33: 1. Drain cock
Keeptheairhoseawayfromheat(over60°C,over
140°F),awayfromchemicals(thinner,strongacidsor
alkalis).Also,routethehoseawayfromobstacleswhich
it may become dangerously caught on during operation.
Hosesmustalsobedirectedawayfromsharpedges
and areas which may lead to damage or abrasion to
the hose.
TomaintainproductSAFETYandRELIABILITY,
repairs,anyothermaintenanceoradjustmentshould
beperformedbyMakitaAuthorizedorFactoryService
Centers,alwaysusingMakitareplacementparts.
OPTIONAL
ACCESSORIES
CAUTION: These accessories or attachments
are recommended for use with your Makita tool
specied in this manual.Theuseofanyother
accessoriesorattachmentsmightpresentariskof
injurytopersons.Onlyuseaccessoryorattachment
foritsstatedpurpose.
Ifyouneedanyassistanceformoredetailsregard-
ingtheseaccessories,askyourlocalMakitaService
Center.
• Nails
• Airhose
• Safetygoggles
NOTE: Some items in the list may be included in the
toolpackageasstandardaccessories.Theymay
differfromcountrytocountry.