Operation Manual

7 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model: AN935H
Air pressure 1.28 - 2.26 MPa (12.8 - 22.6 bar)
Nail length Wire-collated coil nail 45 mm - 90 mm
Sheet-collated coil nail 45 mm - 75 mm
Nail capacity Wire-collated coil nail 120 pcs - 300 pcs
Sheet-collated coil nail 200 pcs
Minimum hose diameter 4.0 mm
Pneumatic tool oil ISO VG32 or equivalent
Dimensions (L x W x H) 299 mm x 125 mm x 330 mm
Net weight 2.7 kg
• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange
without notice.
• Specicationsmaydifferfromcountrytocountry.
• WeightaccordingtoEPTA-Procedure01/2003
Symbols
Thefollowingshowthesymbolsusedfortheequip-
ment.Besurethatyouunderstandtheirmeaningbefore
use.
Read instruction manual.
Wearsafetyglasses.
Donotuseonscaffoldings,ladders.
Intended use
Thetoolisintendedforthepreliminaryinteriorwork
suchasxingoorjoistsorcommonraftersandframing
workin2″x4″housing.
Noise
ThetypicalA-weightednoiseleveldeterminedaccord-
ingtoEN792:
Sound pressure level (L
pA
):84dB(A)
Sound power level (L
WA
):97dB(A)
Uncertainty(K):3dB(A)
WARNING: Wear ear protection.
Vibration
Thevibrationtotalvaluedeterminedaccordingto
EN792:
Vibration emission (a
h
):4.5m/s
2
Uncertainty(K):1.5m/s
2
NOTE:Thedeclaredvibrationemissionvaluehas
been measured in accordance with the standard test
methodandmaybeusedforcomparingonetoolwith
another.
NOTE:Thedeclaredvibrationemissionvalue
mayalsobeusedinapreliminaryassessmentof
exposure.
WARNING:Thevibrationemissionduringactual
useofthepowertoolcandifferfromthedeclared
emission value depending on the ways in which the
tool is used.
WARNING:Besuretoidentifysafetymeasures
to protect the operator that are based on an estima-
tionofexposureintheactualconditionsofuse(taking
accountofallpartsoftheoperatingcyclesuchas
thetimeswhenthetoolisswitchedoffandwhenitis
running idle in addition to the trigger time).
EC Declaration of Conformity
For European countries only
TheECdeclarationofconformityisincludedasAnnexA
to this instruction manual.
SAFETY WARNINGS
Pneumatic nailer/stapler safety
warnings
WARNING: WARNING Read all safety warn-
ings and all instructions.Failuretofollowthe
warningsandinstructionsmayresultinseriousinjury,
electricshockand/orre.