Operators Manual

2 ENGLISH
SPECIFICATIONS
Model: AN935H
Air pressure 1.28 - 2.26 MPa (12.8 - 22.6 bar)
Nail length Wire-collated coil nail 45 mm - 90 mm
Sheet-collated coil nail 45 mm - 75 mm
Nail capacity Wire-collated coil nail 120 pcs - 300 pcs
Sheet-collated coil nail 200 pcs
Minimum hose diameter 4.0 mm
Pneumatic tool oil ISO VG32 or equivalent
Dimensions (L x W x H) 299 mm x 125 mm x 330 mm
Net weight 2.7 kg
• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange
without notice.
• Specicationsmaydifferfromcountrytocountry.
• WeightaccordingtoEPTA-Procedure01/2003
Symbols
Thefollowingshowthesymbolsusedfortheequip-
ment. Be sure that you understand their meaning before
use.
Read instruction manual.
Wear safety glasses.
Donotuseonscaffoldings,ladders.
Intended use
Thetoolisintendedforthepreliminaryinteriorwork
suchasxingoorjoistsorcommonraftersandframing
workin2″x4″housing.
Noise
ThetypicalA-weightednoiseleveldeterminedaccord-
ingtoEN792:
Sound pressure level (L
pA
):84dB(A)
Sound power level (L
WA
):97dB(A)
Uncertainty(K):3dB(A)
WARNING: Wear ear protection.
Vibration
Thevibrationtotalvaluedeterminedaccordingto
EN792:
Vibration emission (a
h
):4.5m/s
2
Uncertainty(K):1.5m/s
2
NOTE:Thedeclaredvibrationemissionvaluehas
been measured in accordance with the standard test
method and may be used for comparing one tool with
another.
NOTE:Thedeclaredvibrationemissionvalue
may also be used in a preliminary assessment of
exposure.
WARNING:Thevibrationemissionduringactual
use of the power tool can differ from the declared
emission value depending on the ways in which the
tool is used.
WARNING: Be sure to identify safety measures
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it is
running idle in addition to the trigger time).
EC Declaration of Conformity
For European countries only
TheECdeclarationofconformityisincludedasAnnexA
to this instruction manual.
SAFETY WARNINGS
Pneumatic nailer/stapler safety
warnings
WARNING: WARNING Read all safety warn-
ings and all instructions. Failure to follow the
warningsandinstructionsmayresultinseriousinjury,
electricshockand/orre.
Save all warnings and instruc-
tions for future reference.
For personal safety and proper operation and maintenance
ofthetool,readthisinstructionmanualbeforeusingthetool.
General safety
1.
Do not permit those uninstructed to use the tool.
2. No horseplay. Respect the tool as a working
implement.
3. Do not operate when under the inuence of
alcohol, drugs or the like.
4. Never alter the tool.