ENGLISH (Original instructions) INSTRUCTION MANUAL Cordless Brushcutter / Cordless String Trimmer BBC231U BBC300L BC231UD BC300LD 010751 IMPORTANT: Read Before Using.
ENGLISH (Original instructions) SPECIFICATIONS Model BBC231U / BC231UD Type of handle Bike handle No load speed High 0 - 7,300 min-1 Low 0 - 5,300 min-1 Overall length 1,880 mm Cutting blade diameter 230 mm Net weight 7.1 kg Rated voltage D.C. 36 V Standard battery cartridge and charger Always keep the combinations of battery/charger on the right columns.
ENH035-4 the times when the tool is switched off and when it is running idle in addition to the trigger time). For European countries only EC Declaration of Conformity END008-4 We Makita Corporation as the responsible manufacturer declare that the following Makita machine(s): Designation of Machine: Cordless Brushcutter Model No./ Type: BBC231U,BC231UD Specifications: see "SPECIFICATIONS" table.
The technical documentation is kept by: Makita International Europe Ltd. Technical Department, Michigan Drive, Tongwell, Milton Keynes, Bucks MK15 8JD, England General instructions 1. The conformity assessment procedure required by Directive 2000/14/EC was in Accordance with annex VIII. Notified Body: TÜV Rheinland LGA Products GmbH Tillystraße 2 90431 Nürnberg, Germany Identification number 0197 Measured sound power level 91.
3. 4. 5. 6. During operation, never stand on an unstable or slippery surface or a steep slope. During the cold season, beware of ice and snow and always ensure secure footing. During operation, keep bystanders or animals at least 15 m away from the tool. Stop the tool as soon as someone approaches. Before operation, examine the work area for stones or other solid objects. They can be thrown or cause dangerous kickback and result in serious injury and/or property damage.
10. 11. 12. 13. 14. 15. 16. When you leave the tool, even if it is a short time, always remove the battery cartridge. The unattended tool with the battery cartridge installed may be used by unauthorized person and cause serious accident. If grass or branches get caught between the cutting attachment and guard, always turn the tool off and remove the battery cartridge before cleaning. Otherwise the cutting attachment may rotate unintentionally and cause serious injury.
ENC007-7 Maintenance 1. 2. 3. 4. 5. 6. 7. 8. IMPORTANT SAFETY INSTRUCTIONS Have your tool serviced by our authorized service center, always using only genuine replacement parts. Incorrect repair and poor maintenance can shorten the life of the tool and increase the risk of accidents. Before doing any maintenance or repair work or cleaning the tool, always turn it off and remove the battery cartridge. Always wear protective gloves when handling the cutting blade.
PARTS DESCRIPTION BBC231U / BC231UD BBC300L / BC300LD 1 1 2 2 4 5 5 3 3 4 9 11 9 6 6 12 10 10 7 7 8 8 1 Battery cartridge 7 Gear case 2 Indication lamp 8 Cutting tool 3 Switch trigger 9 Shoulder harness 4 Hanger (suspension point) 10 Buckle 5 Grip 11 Barrier 6 Guard (cutting attachment guard) 12 Guard extension 013124 8
lock-off button. This can cause switch breakage. Operating a tool with a switch that does not actuate properly can lead to loss of control and serious personal injury. FUNCTIONAL DESCRIPTION • WARNING: Always be sure that the tool is switched off and battery cartridge is removed before adjusting or checking the functions on the tool. Failure to switch off and remove the battery cartridge may result in serious personal injury from accidental start-up.
should be depressed. To remove weeds and debris that are jammed in the rotating head the tool can be reversed by depressing the "B" side of the switch. In the reverse position the tool will only operate for a short period of time and automatically shut off. Battery/motor protection system The battery cartridge and tool are provided with protection devices that will automatically reduce or cut off power to the tool when overload situations develop that may cause damage to the tool or battery cartridge.
Action to be taken Status - Blinking Battery power has been nearly used up. Replace the battery with fully charged one. - Lighting On Battery protector is shutting off the power battery power has been used up. Replace the battery with fully charged one. Release the switch trigger and remove the cause of the motor lock or overload. If the cutting tool is locked by entangling weeds or the like, always remove the battery cartridge before clearing it.
Installing the handle For model BBC231U,BC231UD Indicator lamps Lighted Off E Blinking F Remaining capacity 1. Grip 2. Handle 3. Screw 1 70% to 100% 45% to 70% 3 20% to 45% 0% to 20% 2 Charge the battery. 012456 The battery may have malfunctioned. Insert the shaft of the handle into the grip as shown. Align the screw hole in the grip with the one in the shaft. Tighten the screw securely.
Installing the guard 1 1. Cutter blade 2. Guard 2 1. Two bolts 2. Protector cover 3. Guard 1 2 3 010778 Fix the guard to the clamp with two bolts as shown. Tighten the right and left bolts evenly. 013140 1 1. Nylon cutting head 2. Guard 3. Guard extension 2 1 1. Guard 2. Guard extension 3 2 010768 • • 010777 WARNING: Never use the tool without the guard illustrated in place. Failure to do so can cause serious personal injury. When using a nylon cutting head, mount the guard extension.
cutter blade with the hex nut with 13 to 23 Nm of tightening torque during holding the receive washer with hex wrench. Installing the cutter blade • WARNING: The outside diameter of the cutter blade must be 230 mm. Never use any blade exceeding 230 mm in outside diameter. CAUTION: The cutter blade must be well polished, free of cracks or breakage. Polish or replace the cutter blade every three hours of operation. • Always wear gloves when handling the cutter blade.
Detachment OPERATION 1. Buckle Correct handling of tool (BBC231U,BC231UD) Correct posture • WARNING: Always position the tool on your right-hand side so that the shaft of the left handle is always in front of your body. Correct positioning of the tool allows for maximum control and will reduce the risk of serious personal injury caused by kickback. 1 010759 The buckle is provided with a means of quick release which can be accomplished by simply squeezing the sides and the buckle.
Detachment Correct handling of tool (BBC300L,BC300LD) Correct posture • WARNING: Always position the tool on your right-hand side so that the barrier is always in front of your body. Correct positioning of the tool allows for maximum control and will reduce the risk of serious personal injury caused by kickback. 010817 The buckle is provided with a means of quick release which can be accomplished by simply squeezing the sides and the buckle.
cord. MAINTENANCE 1. Spool 2. For left hand rotation 80mm WARNING: • Always be sure that the tool is switched off and battery cartridge is removed before attempting to perform inspection or maintenance on the tool. Failure to switch off and remove the battery cartridge may result in serious personal injury from accidental start-up. NOTICE: Never use gasoline, benzine, thinner, alcohol or the like. Discoloration, deformation or cracks may result.
1 2 1. Cover 2. Protrusion (Not shown) 3. Slot of the eyelet 3 010776 Align the protrusion on the underside of the cover with the slots of the eyelets. Then push cover firmly onto the housing to secure it. Make sure the latches fully spread in the cover. To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized Service Centers, always using Makita replacement parts.
TROUBLE SHOOTING Before asking for repairs, conduct your own inspection first. If you find a problem that is not explained in the manual, do not attempt to dismantle the tool. Instead, ask Makita Authorized Service Centers, always using Makita replacement parts for repairs. Malfunction status Motor does not run. Motor stops running after a little use. Action Cause Battery cartridge is not installed. Install the battery cartridge. Battery problem (under voltage) Recharge the battery.
OPTIONAL ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center.
Makita Corporation Anjo, Aichi, Japan 884944H226 24 www.makita.