ENGLISH (Original instructions) INSTRUCTION MANUAL Cordless Angle Screwdriver BFL061F BFL082F BFL122F BFL202F 013041 IMPORTANT: Read Before Using.
ENGLISH (Original instructions) SPECIFICATIONS Model Fastening torque BFL061F BFL082F BFL122F BFL202F Hard joint 1.5 - 6 N•m 2 - 8 N•m 5 - 12 N•m 8 - 20 N•m Soft joint 1.5 - 6 N•m 2 - 8 N•m 5 - 12 N•m 8 - 20 N•m Angle drive head 9.5 mm square or 6.35 mm hex No load speed (min-1) 470 Dimensions 700 410 220 422 x 74 x 98 mm (with Battery Cartridge BL1430) 405 x 74 x 98 mm (with Battery Cartridge BL1415) 1.7 kg (with Battery Cartridge BL1430) Net weight 1.
ENH101-16 3. Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control. Electrical safety 4. Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock. 5. Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators.
terminal to another. Shorting the battery terminals together may cause burns or a fire. 27. Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns. Service 28. Have your power tool serviced by a qualified repair person using only identical replacement parts.
2. 3. 4. 5. 6. 7. 8. 9. Do not disassemble battery cartridge. If operating time has become excessively shorter, stop operating immediately. It may result in a risk of overheating, possible burns and even an explosion. If electrolyte gets into your eyes, rinse them out with clear water and seek medical attention right away. It may result in loss of your eyesight. Do not short the battery cartridge: (1) Do not touch the terminals with any conductive material.
Reversing switch action Battery remaining capacity indicator (only for models with Battery BL1430A) 1. Reversing switch lever A Battery BL1430A is equipped with the battery remaining capacity indicator. Checking the remaining battery capacity 1 B 003618 CAUTION: Always check the direction of rotation before operation. • Use the reversing switch only after the tool comes to a complete stop. Changing the direction of rotation before the tool stops may damage the tool.
LED indicator / Beeper Led indicator / Beeper on the tool shows the following functions. Status of the LED indicator/beeper Function Status Action to be taken LED indicator Auto-stop fastening Delayed re-start This function works when the tool has reached the preset fastening torque and normal tightening has been completed. This helps Lights up in green for overtightening to be avoided. approximately one second.
Adjusting the fastening torque ASSEMBLY 1. Adjusting grip 2. Ring 1 • CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed before carrying out any work on the tool. Selecting correct socket or screw bit There are different types of sockets or bits for some models depending on applications. Choose and install a correct socket or bit for your application. 2 013070 When you wish to drive machine screws, wood screws, hex bolts, etc.
OPERATION Hold the tool firmly and place the socket over the bolt or nut. Then switch the tool on. When the clutch cuts in, the motor will stop automatically. Then release the switch trigger. 1 2 NOTE: • Hold the tool with its square drive pointed straight at the bolt or nut, or the bolt or nut will be damaged. 003628 Use a screwdriver to remove the brush holder caps. Take out the worn carbon brushes, insert the new ones and secure the brush holder caps.
Makita Corporation Anjo, Aichi, Japan 885144A221 12 www.makita.
