Operation Manual

6
ENGLISH (Original Instructions)
Explanation of general view
SPECIFICATIONS
• Due to our continuing programme of research and development, the specifications herein are subject to change without
notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
ENE043-1
The tool is intended for hammer drilling and drilling in
brick, concrete and stone as well as for chiselling work.
It is also suitable for drilling without impact in wood, metal,
ceramic and plastic.
General Power Tool Safety
Warnings
GEA010-1
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
CORDLESS ROTARY HAMMER
SAFETY WARNINGS
GEB046-2
1. Wear ear protectors. Exposure to noise can cause
hearing loss.
2. Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury.
3. Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring. Cutting
accessory contacting a “live” wire may make exposed
metal parts of the power tool “live” and could give the
operator an electric shock.
4. Wear a hard hat (safety helmet), safety glasses
and/or face shield. Ordinary eye or sun glasses
are NOT safety glasses. It is also highly
recommended that you wear a dust mask and
thickly padded gloves.
5. Be sure the bit is secured in place before
operation.
6. Under normal operation, the tool is designed to
produce vibration. The screws can come loose
easily, causing a breakdown or accident. Check
tightness of screws carefully before operation.
7. In cold weather or when the tool has not been
used for a long time, let the tool warm up for a
while by operating it under no load. This will
loosen up the lubrication. Without proper warm-
up, hammering operation is difficult.
8. Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
9. Hold the tool firmly with both hands.
10. Keep hands away from moving parts.
11. Do not leave the tool running. Operate the tool
only when hand-held.
1. Red indicator
2. Button
3. Battery cartridge
4. Indicator lamps
5. CHECK button
6. Switch trigger
7. Lamp
8. Reversing switch lever
9. Quick change chuck for SDS-plus
10. Change cover line
11. Change cover
12. Spindle
13. Quick change drill chuck
14. Rotation with hammering
15. Rotation only
16. Hammering only
17. Grip base
18. Teeth
19. Loosen
20. Tighten
21. Side grip
22. Protrusion
23. Bit shank
24. Bit grease
25. Bit
26. Chuck cover
27. O symbol
28. Action mode changing knob
29. Depth gauge
30. Dust cup
31. Blow-out bulb
32. Chuck adapter
33. Keyless drill chuck
34. Sleeve
35. Ring
36. Limit mark
37. Brush holder cap
38. Screwdriver
Model BHR262/HR262D BHR262T/HR262TD
Capacities
Concrete 26 mm
Steel 13 mm
Wood 32 mm
No load speed (min
-1
) 0 - 1,200
Blows per minute 0 - 4,800
Overall length 363 mm 387 mm
Net weight 4.5 kg 4.8 kg
Rated voltage D.C. 36 V