Instructions / Assembly

NO. Part name Procedure
10
COVER, CAMGEAR (1) Apply the oil over the sliding surface of CAMGEAR and CAM LIFTER
befor fitting COVER, CAMGEAR.
11
VALVE CLEARANCE (1) Loosen NUT and adjust VALVE CLEARANCE by rotating ADJUST SCREW with
a hexagon bar wrench. Adjust VALVE CLEARANCE at the compression top dead
centeer(the position of the CAM top and FLYWHEEL should remain in
the same one at no.9).
(2) Tighten NUT firmly after the adjustment.
12
ROCKER COVER (1)
SCREW ASSY
W,SW M5*14(3 pcs)
Tightening torque
45 ㎏･㎝
+10
-
5
NUT
Tightening torque
50 ㎏･㎝
+15
0
SCREW ASSY
W,SW M5*16(3 pcs)
Tightening torque
45 ㎏･㎝
+10
-5
ROCKER COVER
GASKET,ROCKER COVER
･Clearance： 0.15mm
21
Thickness gauge
ADJUST SCREW
Apply the oil over the sliding surface in the vicinity of ROCKER ARM
befor fitting ROCKER COVER.