Instructions / Assembly

NO. Part name Procedure
15
INSULATOR (1) Run the lead wires, the red one down and black one up, through
the upper cut-out of INSULATOR.
(2)
Join the red lead wire (male terminal)
to the engine side (in the back).
INSULATOR
GASKET,INSULATOR
The square part upward.
ADJUST SCREW
SCREW ASSY
W,SW M5*18(2 pcs)
Tightening torque
45 ㎏･㎝
+10
-
5
SCREW ASSY
W,SW M5*14(1 pc)
Tightening torque
45 ㎏･㎝
+10
-5
ADJUST SCREW
INSULATOR
3mm
Cut-out
Red
Black
WIRE fixing
WIRE
23
wire
wire