Instructions / Assembly

6． RECOIL STARTER

The RECOIL STARTER rarely malfunctions under normal use. When it fails, however, or needs

greasing, disassemble and reassemble it according to the following procedure.

Tools：Screwdriver and pincens(pliers)

１）Disassembly

（１）Remove the RECOIL STARTER from

the engine.

（２）Pull out the STARTER KNOB, press

the ROTARY REEL with your thumb

as shown in Fig.6-1 whe

n the REEL

cut-out comes to the STARTER ROPE

OUTLET, and pull the STARTER ROPE

to the inside of the RECOIL STARTER

with a screwdriver.Using the

cut-out, rewind the REEL to the

direction of the arrow until it

stops by controlling the rotation

of the REEL with your thumb.

Fig.6-1

（３）Remove the parts as shown in Fig.6-2.

Remove the REEL slowly by turning it back and forth gently in a way that SPIRAL SPRING

will not come away from the REEL.

(See the other notice at page 30 for SPIRAL SPRING'S coming away.)

Untie the STARTER ROPE knot at the REEL end and take it away to complete the

disassembly.

Fig.6-2

SET SCREW

SWING ARM

COLLAR

REEL

SPIRAL SPRING

STARTER SHAFT

STARTER KNOB

STARTER ROPE