Instructions / Assembly

Ⅲ．DISASSEMBLY AND REASSEMBLY PROCEDURE
1.EQUIPMENT DISASSEMBLY
Step Part of remove Procedure Fastener PCS
Notice
Special tool
1)Unscrew the CAP,OIL.
Keep contamination or dust off
the CAP,OIL and gauge.
2)Drain the engine oil.
3)
Screw the CAP,OIL onto the oil tank.
1)Drain the fuel.
2)Remove the fuel tube.
The fuel will spout if the fuel tube
is removed with the fuel tank filled
1) Remove the COVER,AIR CLEANER.
M5X14mm 1
2) Remove the AIR CLEANER ELEMENT.
Keep contaminant or dust off
the AIR CLEANER ELEMENT.
1)Remove the GUARD,OIL.
5X16mm 3
M4X16mm 2
1)Remove the CASE 1,VOLUTE.
5X16mm
10
2)Remove the GRIP.
Urea screw 1
5X16mm 1
4) Remove the CRUISE CONTROL LEVER.
4X16mm 1
5)Remove the LEVER,THROTTLE.
6)Remove the CONTROL CABLE.
7)Remove the WIRE.
8)Remove the STOP SWITCH.
9)Remove the RUBBER,FRICTION.
1)Remove the IMPELLER.
M6X20mm
2
2)Remove the engine.
M5X30mm 3
7 TANK,FUEL
1)Remove the TANK,FUEL.
5X16mm 3
CASE 1,VOLUTE5
ENGINE6
2)Remove the COVER,ENGINE.
3)Remove the PROTECTOR.
ENGINE OIL1
FUEL2
COVER,AIR CLEANER3
COVER,ENGINE4
5
with fuel.