ENGLISH (Original instructions) INSTRUCTION MANUAL Radio BMR100 WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Symbols The following show the symbols used for the equipment. Be sure that you understand their meaning before use. Read instruction manual. Always recycle batteries Li-ion IMPORTANT SAFETY INSTRUCTIONS WARNING: When using electric tools, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and personal injury, including the following: 1. Read this instruction manual and the charger instruction manual carefully before use. 2. Clean only with dry cloth. 3.
L K 15 A B 11 J PM C I D H E G F Controls: 1. Power and Sleep timer 2. Band/Tuning step selection and Mono button 3. Radio alarm set 4. Buzzer alarm set 5. Preset stations 6. Scan tuning and Time set 7. Volume and Tuning controls 8. DC IN socket 9. Input terminal (AUX IN1) 10. Soft bended rod antenna 11. Battery compartment (covering main battery pack and back up batteries) 12. Handle 13. Speaker 14. Battery compartment locker 15.
2. Remove back up battery compartment cover and insert 2 fresh UM-3 (AA sizes). Make sure the batteries are with correct polarity as shown inside the compartment. Replace the battery cover. 3. BH2433 | BH2420 After back up batteries are inserted, insert the main battery pack to power radio. The suitable battery packs for this radio listed as below. it into place. Always insert it all the way until it locks in place with a little click. • Do not use force when inserting the battery cartridge.
1. Soft bended rod antenna 1 band, rotate the radio to get best signal. Try to avoid to operate the radio next to computer screen and other equipment which will cause interference to the radio. 3. Press and release Scan button (long press Scan button more than 2 seconds will activate time setting), LCD display will flash Scan symbol and the radio will up search and stop automatically when it finds a radio station,. Press the Scan button again to pick up the found station.
3. Momentarily press the required Preset button, the preset number and station frequency will appear in the display. Setting the radio alarm When the radio alarm is selected, the radio will turn on and play the chosen radio station at the chosen alarm time. The radio alarm will continue for one hour unless turned off by pressing the Power button. Pressing the Power button whilst the alarm is activated will cancel the alarm for 24 hours.
After FM tuning step is reset, pressing Step/Band button again, display will show AM (MW) and flash 9 kHz. By rotating Tuning control, you may adjust to 10 kHz per tuning step. Complete the setting by pressing Step/Band button. Change Stereo to Mono When the stereo FM station reception is weak, you can improve it by pressing Mono button for 2 seconds. The sound is no longer in stereo and stereo indicator disappears. How to play other audios CAUTION: Unplug this apparatus before connecting other audios.
Makita Corporation Anjo, Aichi, Japan 3A81QP5Z40000 BMR100_ENGE_1009