Finishing Sander BO3700 DOUBLE INSULATION
SPECIFICATIONS Model BO3700 Pad size .................................................................................................................................... 93 mm x 185 mm Abrasive paper size ................................................................................................................... 93 mm x 228 mm Orbits per minute ..................................................................................................................................... 10,000 Overall length ..
4 1 3 2 5 1 2 8 6 9 3 7 3 4 13 11 12 10 5 6 7 3
Symbols The following show the symbols used for the tool. Be sure that you understand their meaning before use. ❏ Read instruction manual.
ENGLISH Explanation of general view 1 2 3 4 Clamper Conventional type of abrasive paper with pre-punched holes Pad for conventional type of abrasive paper Punch plate 5 6 7 8 Conventional type of abrasive paper without pre-punched holes Screws Screwdriver Hook-and-loop type of abrasive paper with pre-punched holes 9 10 11 12 13 Pad for hook-and-loop type of abrasive paper Dust bag Dust spout Switch trigger Lock button 14.
ADDITIONAL SAFETY RULES Switch action (Fig. 6) 1. 2. CAUTION: Before plugging in the tool, always check to see that the switch trigger actuates properly and returns to the “OFF” position when released. 3. 4. Hold the tool firmly. Do not leave the tool running. Operate the tool only when hand-held. This tool has not been waterproofed, so do not use water on the workpiece surface. Ventilate your work area adequately when you perform sanding operations. To start the tool, simply pull the trigger.
ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. The accessories or attachments should be used only in the proper and intended manner.
Makita Corporation 884274-996
