ENGLISH (Original instructions) INSTRUCTION MANUAL Finishing Sander BO4555 BO4556 BO4557 BO4558 008292 DOUBLE INSULATION WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
ENGLISH SPECIFICATIONS Model BO4555 BO4556 Pad size BO4558 BO4557 112mm ×102mm Orbits per minute (min-1) 14,000 131 mm x 112 mm x 142 mm Dimensions (L x W x H) Net weight 131 mm x 112 mm x 141 mm 1.1 kg Safety class 1.2 kg 131 mm x 112 mm x 137 mm 1.0 kg /II • Due to our continuing programme of research and development, the specifications herein are subject to change without notice. • Specifications may differ from country to country.
8th April 2009 For Model BO4557 ENG104-2 Noise The typical A-weighted noise level determined according to EN60745: Sound pressure level (LpA) : 76 dB(A) Uncertainty (K) : 3 dB(A) The noise level under working may exceed 80 dB (A). Wear ear protection. 000230 Tomoyasu Kato Director Makita Corporation 3-11-8, Sumiyoshi-cho, Anjo, Aichi, JAPAN ENG211-2 Vibration The vibration total value (tri-axial determined according to EN60745: Work mode : sanding metal plate Vibration emission (ah) : 3.
19. Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. 20. Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. 21.
6. Installing or removing abrasive paper Some material contains chemicals which may be toxic. Take caution to prevent dust inhalation and skin contact. Follow material supplier safety data. Use of this tool to sand some products, paints and wood could expose user to dust containing hazardous substances. Use appropriate respiratory protection. Be sure that there are no cracks or breakage on the pad before use. Cracks or breakage may cause a personal injury. 7. 8. 008299 SAVE THESE INSTRUCTIONS.
Installing paper dust bag (accessory) CAUTION: Be sure to remove the punch plate before operating the tool. Model BO4555 only • 2 1. Groove 2. Front fixing cardboard 3. Front side of paper dust bag 1 NOTE: Use Makita hook-and-loop sandpaper with this sander. 1. Velcro sandpaper 2. Base 2 3 003742 1 Place the paper dust bag on the paper dust bag holder with its front side upward. Insert the front fixing cardboard of the paper dust bag into the groove of the paper dust bag holder. 008296 1.
OPERATION If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. • Abrasive paper (without pre-punched holes) • Paper dust bag • Paper dust bag holder • Punch plate • Dust bag Sanding operation 008294 CAUTION: Never run the tool without the abrasive paper. You may seriously damage the pad. • Never force the tool. Excessive pressure may decrease the sanding efficiency, damage the abrasive paper and/or shorten tool life. Hold the tool firmly.
Makita Corporation Anjo, Aichi, Japan 884717E227 8
