Operation Manual

6
ENGLISH
Explanation of general view
1Button
2 Red part
3 Battery cartridge
4 Switch trigger
5Lamp
6 Reversing switch lever
7 Action mode change lever
8 Adjusting ring
9 Graduation
10 Pointer
11 Bit
12 Sleeve
13 Bit-piece
14 Hook
15 Screw
16 Groove
17 Standard bolt
18 Fastening torque
19 Proper fastening torque
20 Fastening time
21 High tensile bolt
22 Limit mark
23 Rear cover
24 Screws
25 Spring
26 Arm
27 Recessed part
28 Carbon brush cap
29 Hole
SPECIFICATION
• Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
• Note: Specifications may differ from country to country.
Intended use
The tool is intended for impact screw driving in wood and
for impact drilling in brick, concrete and stone as well as
for drilling and screw driving without impact in wood,
metal, ceramic and plastic.
Safety hints
For your own safety, please refer to the enclosed safety
instructions.
SPECIFIC SAFETY RULES
GEB026-1
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict
adherence to 4 mode impact driver safety rules. If
you use this power tool unsafely or incorrectly,
you can suffer serious personal injury.
1. Hold power tools by insulated gripping surfaces
when performing an operation where the cutting
tool may contact hidden wiring or its own cord.
Contact with a “live” wire will make exposed metal
parts of the tool “live” and shock the operator.
2. Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
Model BTP130 BTP140
Impact driver mode
Max. fastening torque 135 N•m 140 N•m
Capacities
Machine screw 4 mm – 8 mm
Standard bolt 5 mm – 14 mm
High tensile bolt 5 mm – 12 mm
No load speed (min
–1
) 0–2,400 0–2,300
Impacts per minute 0 – 3,200
Hammer drill mode
No load speed (min
–1
) 0–2,400 0–2,300
Blows per minute 0 – 28,800 0 – 27,600
Capacities Concrete 8 mm
Drill mode
No load speed (min
–1
)
High (2) 0–2,400 0–2,300
Low (1) 0 – 700
Capacities
Steel
High (2) 6.5 mm
Low (1) 10 mm
Wood
High (2) 9 mm
Low (1) 21 mm
Screw driver mode
No load speed (min
–1
) 0–2,400 0–2,300
Capacities Machine screw M4
Overall length 186 mm
Net weight 1.7 kg 1.8 kg
Rated voltage D.C. 14.4 V D.C. 18 V