Specifications
2
SPECIFICATIONS
• Due to our continuing programme of research and development, the specifications herein are subject to change
without notice.
• Note: Specifications may differ from country to country.
END001-1
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
..................Only for EU countries
Do not dispose of electric equipment
together with household waste
material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment and its
implementation in accordance with
national law, electric equipment that
have reached the end of their life
must be collected separately and
returned to an environmentally
compatible recycling facility.
Intended use
The tool is intended for impact screw driving in wood and
for impact drilling in brick, concrete and stone as well as
for drilling and screw driving without impact in wood,
metal, ceramic and plastic, .
For Model BTP130
For European countries only
Noise and Vibration
The typical A-weighted noise levels are
sound pressure level: 89 dB (A)
sound power level: 100 dB (A)
Uncertainty: 3 dB
– Wear ear protection. –
The typical weighted root mean square acceleration
value is 9 m/s
2
.
These values have been obtained according to EN60745.
For Model BTP140
For European countries only
Noise and Vibration
The typical A-weighted noise levels are
sound pressure level: 89 dB (A)
sound power level: 100 dB (A)
Uncertainty: 3 dB
– Wear ear protection. –
The typical weighted root mean square acceleration
value is 8 m/s
2
.
These values have been obtained according to EN60745.
Model BTP130 BTP140
Impact driver mode
Max. fastening torque 135 N•m 145 N•m
Capacities
Machine screw 4 mm - 8 mm
Standard bolt 5 mm - 14 mm
High tensile bolt 5 mm - 12 mm
No load speed (min
-1
)
0 - 2,400 0 - 2,300
Impacts per minute 0 - 3,200
Hammer drill mode
No load speed (min
-1
)
0 - 2,400 0 - 2,300
Blows per minute 0 - 28,800 0 - 27,600
Capacities Concrete 8 mm
Drill mode
No load speed (min
-1
)
High (2) 0 - 2,400 0 - 2,300
Low (1) 0 - 700
Capacities
Steel 10 mm
Wood 21 mm
Screw driver mode
No load speed (min
-1
)
0 - 2,400 0 -2,300
Capacities Machine screw M4
Overall length 186 mm
Net weight 1.7 kg 1.8 kg
Rated voltage D.C.14.4 V D.C.18 V