Specifications

-14-
Inner Cover (D) [25]
Ring Gear (E) [21]
BALL BEARING
6901VV-N [23]
Damper [24]
Washer (E) [22]
A
rmature DC 14.4V [26]
Damper [24]
Inner Cover (D) [25]
B
Inner Cover (D) [25]
Brush Block [30]
Side Yoke [50]
Dust Guard Fin (C) [29]
Fit the projected portion of Dust Guard Fin (C) [29] to
the depressed portion of Brush Block [30].
A
rmature DC 14.4 V [26] (pinion)
Yoke (A) [28]
B
A
rmature
DC 14.4 V [26]
Magnet (D) [27]
Ring Gear (E) [21]
Fig. 2 • Magnet (D), Yoke (A), Dust Guard Fin (C), Side Yoke
Fig. 3 • Ring Gear (E), Damper
10. Armature
Press down the tip of Armature DC 14.4V [26]
(pinion) to remove the armature while receiving
Inner Cover (D) [25] so as not to touch the fan of
Armature DC 14.4V [26].
11. Ring Gear (E), Damper
Remove Ring Gear (E) [21] from Inner Cover (D)
[25], and then use a small flat-blade screwdriver to
remove the Damper [24]. (See Fig. 3.)