ENGLISH (Original instructions) INSTRUCTION MANUAL Cordless Blower BUB360 UB360D 011049 IMPORTANT: Read Before Using.
ENGLISH (Original instructions) SPECIFICATIONS Model BUB360 UB360D Air volume (HIGH) 4.4 m3/min. 4.4 m3/min. Air volume (LOW) 3 2.6 m /min. 2.6 m3/min. HIGH 17,000 17,000 LOW 10,000 10,000 (without long nozzle) 436 mm 439 mm (with long nozzle) 921 mm 924 mm Capacities -1 No load speed (min ) Overall length Net weight 3.1 kg 3.1 kg Rated voltage D.C. 36 V D.C.
ENH021-6 Do not Use the blower to inflate balls, rubber boat or the similar. Increased motor revolution may cause dangerous fan breakage and result in serious personal injury. Heated motor and control circuit may cause a fire. 5. Keep children, other bystanders and pets away from the blower while operating. 6. Do not operate the blower near open window, etc. 7. Operating the blower only at reasonable hours is recommended - not early in the morning or late at night when people might be disturbed. 8.
5. 6. 7. 8. 9. Do not short the battery cartridge: (1) Do not touch the terminals with any conductive material. (2) Avoid storing battery cartridge in a container with other metal objects such as nails, coins, etc. (3) Do not expose battery cartridge to water or rain. A battery short can cause a large current flow, overheating, possible burns and even a breakdown. Do not store the tool and battery cartridge in locations where the temperature may reach or exceed 50 ﾟ C (122 ﾟ F).
• the "HIGH/LOW" button again to restart. When the tool does not work even after pressing the "HIGH/LOW" button, the battery power auto-stop is still at work. Charge the battery cartridge before use. When the remaining battery capacity becomes low: Recharge the battery cartridge. Indicator lamps Lighted Off Blinking E F 70% to 100% 45% to 70% Switch action 1 Remaining capacity 20% to 45% 2 0% to 20% 1. HIGH/LOW button 2. OFF button Charge the battery. The battery may have malfunctioned.
To install the long nozzle, push in onto the blower outlet of the tool all the way. When performing an operation in corner, start from the corner and then move to wide area. MAINTENANCE 1. Button 1 • 1 CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed before attempting to perform inspection or maintenance. Cleaning 011055 To remove the long nozzle, press its both buttons and with the buttons being pressed pull it out. Installing the shoulder strap 1 1.
Use a screwdriver to remove the brush holder caps. Take out the worn carbon brushes, insert the new ones and secure the brush holder caps. To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized Service Centers, always using Makita replacement parts. OPTIONAL ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual.
Makita Corporation Anjo, Aichi, Japan 884967C224 8 www.makita.
