Use and Care Manual

10 ENGLISH
CAUTION: When removing the portable power pack,
press the lock button while holding the handle rmly.
1
2
Fig.17
► 1. Handle 2. Lock button
3. Attach the cord to the cord holders as shown in
the gure.
1
2
1
1
Fig.18
► 1. Cord holder 2. Cord
4. Open the plug cover, then align the arrow mark on
the socket with that on the machine, and then insert the
socket into the plug all the way.
1
2
Fig.19
► 1. Plug cover 2. Socket
NOTICE: Do not insert the socket forcibly. If
the socket cannot be inserted easily, it is not being
inserted correctly.
NOTICE: When disconnecting the socket from
the plug, do not hold the cord but hold the socket.
Otherwise, the cord may be damaged and cause a
malfunction of the machine.
To remove the portable power pack, perform the instal-
lation procedure in reverse.
Indicating the remaining battery
capacity
1
2
Fig.20
► 1. Battery indicator 2. Check button
Press the check button to indicate the remaining battery
capacity.
Battery indicator status Remaining
battery
capacity
On O󰀨
Blinking
50% to 100%
20% to 50%
0% to 20%
NOTE: The indicator lamp for remaining battery
capacity is just for a reference. The actual battery
capacity may di󰀨er depending on the usage condi-
tions or ambient temperature.
NOTE: While the machine is in operation, the indica-
tor lamp does not light up even if you press the check
button.
NOTE: The lamp automatically goes o󰀨 after a few
seconds.