operation manual

9
ENG905-1
Noise
The typical A-weighted noise level determined according
to EN60745:
Model 5603R, 5703R
Sound pressure level (L
pA
): 93 dB (A)
Sound power level (L
WA
): 104 dB (A)
Uncertainty (K): 3 dB (A)
Model 5705R, 5143R
Sound pressure level (L
pA
): 94 dB (A)
Sound power level (L
WA
): 105 dB (A)
Uncertainty (K): 3 dB (A)
Model 5903R
Sound pressure level (L
pA
): 95 dB (A)
Sound power level (L
WA
): 106 dB (A)
Uncertainty (K): 3 dB (A)
Model 5103R
Sound pressure level (L
pA
): 97 dB (A)
Sound power level (L
WA
): 108 dB (A)
Uncertainty (K): 3 dB (A)
Wear ear protection
ENG900-1
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Model 5603R
Work mode: cutting wood
Vibration emission (a
h, W
): 2.5 m/s
2
or less
Uncertainty (K): 1.5 m/s
2
Model 5103R, 5143R
Work mode: cutting wood
Vibration emission (a
h, W
): 2.5 m/s
2
or less
Uncertainty (K): 1.5 m/s
2
Work mode: cutting metal
Vibration emission (a
h, CM
): 2.5 m/s
2
or less
Uncertainty (K): 1.5 m/s
2
Model 5703R
Work mode: cutting wood
Vibration emission (a
h, W
): 3.5 m/s
2
Uncertainty (K): 1.5 m/s
2
Model 5903R
Work mode: cutting wood
Vibration emission (a
h, W
): 3.0 m/s
2
Uncertainty (K): 1.5 m/s
2
Model 5705R
Work mode: cutting wood
Vibration emission (a
h, W
): 2.5 m/s
2
Uncertainty (K): 1.5 m/s
2
ENG901-1
• The declared vibration emission value has been mea-
sured in accordance with the standard test method and
may be used for comparing one tool with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
• The vibration emission during actual use of the power
tool can differ from the declared emission value
depending on the ways in which the tool is used.
• Be sure to identify safety measures to protect the oper-
ator that are based on an estimation of exposure in the
actual conditions of use (taking account of all parts of
the operating cycle such as the times when the tool is
switched off and when it is running idle in addition to
the trigger time).
ENH101-15
For European countries only
EC Declaration of Conformity
We Makita Corporation as the responsible manufac-
turer declare that the following Makita machine(s):
Designation of Machine: Circular Saw
Model No./ Type:
5603R, 5703R, 5705R, 5903R, 5103R, 5143R
are of series production and
Conforms to the following European Directives:
2006/42/EC
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
The technical documentation is kept by our authorized
representative in Europe who is:
Makita International Europe Ltd.
Michigan Drive, Tongwell,
Milton Keynes, Bucks MK15 8JD, England
30.1.2009
Tomoyasu Kato
Director
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi, 446-8502, JAPAN