Operators Manual

8 ENGLISH
Installing hook
3
2
1
►1. Groove 2. Hook 3. Screw
Thehookisconvenientfortemporarilyhangingthetool.
Thiscanbeinstalledoneithersideofthetool.Toinstall
the hook, insert it into a groove in the tool housing on
eithersideandthensecureitwithascrew.Toremove,
loosen the screw and then take it out.
Chuck key holder
For model DA332D only (optional accessory)
2
1
►1. Chuck key holder 2. Screw
Toinstallthechuckkeyholder,xittotheconvexpor-
tion of the tool housing on either side and then secure
itwithascrew.Toremove,loosenthescrewandthen
take it out.
OPERATION
CAUTION: Always insert the battery cartridge
all the way until it locks in place. If you can see the
red indicator on the upper side of the button, it is not
locked completely. Insert it fully until the red indicator
cannot be seen. If not, it may accidentally fall out of
thetool,causinginjurytoyouorsomeonearound
you.
CAUTION: When the speed comes down
extremely, reduce the load or stop the tool to
avoid the tool damage.
CAUTION: Hold the tool rmly with one hand
on the gripping part of the tool when operating
the tool.
For model DA332D
For model DA333D