User Manual

4
ENGLISH (Original instructions)
Explanation of general view
1-1. Red indicator
1-2. Button
1-3. Battery cartridge
2-1. Star marking
3-1. Speed adjusting dial
4-1. Warning lamp
5-1. Lock lever
5-2. Switch trigger
6-1. Lamp
12-1. Rod handle
14-1. Holder cap
14-2. Rod handle
15-1. Holder cap
17-1. Rubber ring
17-2. Nozzle
17-3. Holder cap
SPECIFICATIONS
Model DCG140 DCG180
Max feed force 5000 N
Feed speed 0 - 28 mm/s
with short (300 ml) holder 214 mm
Stroke
with long (600 ml) holder 350 mm
with short (300 ml) holder 404 mm
Overall length
with long (600 ml) holder 538 mm
Standard battery cartridge
BL1415 /
BL1415N
BL1430 /
BL1440
BL1815 / BL1815N /
BL1820
BL1830 / BL1840 /
BL1850
with short (300 ml) holder 2.0 kg 2.2 kg 2.1 kg 2.3 kg
Net weight
with long (600 ml) holder 2.4 kg 2.6 kg 2.5 kg 2.7 kg
Rated voltage D.C.14.4 V D.C.18 V
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
ENE086-1
Intended use
This tool is intended for applying caulking material to
surface.
ENG905-1
Noise
The typical A-weighted noise level determined
according to EN60745:
Sound pressure level (L
pA
) : 70 dB (A) or less
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A)
Wear ear protection
ENG900-1
Vibration
The vibration total value (tri-axial vector sum)
determined according to EN60745:
Vibration emission (a
h
) : 2.5 m/s
2
or less
Uncertainty (K) : 1.5 m/s
2
ENG901-1
•
The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
• The vibration emission during actual use of the
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
• Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
ENH101-17
For European countries only
EC Declaration of Conformity
Makita declares that the following Machine(s):
Designation of Machine:
Cordless Caulking Gun
Model No./ Type: DCG140, DCG180
Conforms to the following European Directives:
2006/42/EC
They are manufactured in accordance with the following
standard or standardized documents:
EN60745
The technical file in accordance with 2006/42/EC is
available from:
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium