User Manual
14 ENGLISH
For tool with locking screw type
wheel guard
Mount the wheel guard with the protrusions on the
wheel guard band aligned with the notches on the bear-
that it can protect the operator according to work. Be
-
dure in reverse.
1
2
3
1. Wheel guard 2. Bearing box 3. Screw
For tool with clamp lever type wheel
guard
Loosen the screw, and then pull the lever in the direc-
tion of the arrow. Mount the wheel guard with the protru-
sions on the wheel guard band aligned with the notches
an angle that it can protect the operator according to
work.
1
2
3
4
1. Wheel guard 2. Bearing box 3. Screw 4. Lever
wheel guard with fastening the screw. Be sure to tighten
1
2
1. Screw 2. Lever
-
dure in reverse.
Installing or removing depressed
Optional accessory
WARNING: When using a depressed center
on the tool so that the closed side of the guard
always points toward the operator.
CAUTION: Make sure that the mounting part
result in the dangerous vibration.
the straight part at the bottom of the spindle.
1
2
4
3
1. Lock nut 2. Depressed center wheel 3. Inner
4. Mounting part
that the spindle cannot revolve, then use the lock nut