User Manual

3
ENGLISH (Original instructions)
Explanation of general view
1-1. Red indicator
1-2. Button
1-3. Battery cartridge
2-1. Star marking
3-1. Battery capacity
4-1. Switch trigger
5-1. Lamp
6-1. Reversing switch lever
7-1. Speed change lever
8-1. Action mode changing ring
8-2. Adjusting ring
8-3. Graduation
8-4. Arrow
9-1. Action mode changing ring
9-2. Adjusting ring
9-3. Graduation
9-4. Arrow
10-1. Sleeve
11-1. Groove
11-2. Hook
11-3. Screw
12-1. Bit holder
12-2. Bit
14-1. Blow-out bulb
SPECIFICATIONS
Model DHP470 DHP480
Concrete 13 mm 13 mm
Steel 13 mm 13 mm
Wood 38 mm 38 mm
Wood screw 10 mm x 90 mm 10 mm x 90 mm
Capacities
Machine screw M6 M6
High (2) 0 - 1,550 0 - 1,550
No load speed(min
-1
)
Low (1) 0 - 400 0 - 400
High (2) 0 - 23,000 0 - 23,000
Blows per minute
Low (1) 0 - 6,000 0 - 6,000
Overall length 199 mm 199 mm
Net weight 1.7 kg 1.5 kg 1.8 kg
Battery cartridge BL1430 / BL1440
BL1815 / BL1815N /
BL1820
BL1830 / BL1840 /
BL1850
Rated voltage D.C. 14.4 V D.C. 18 V
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
ENE039-1
Intended use
The tool is intended for impact drilling in brick, concrete
and stone as well as for drilling without impact in wood,
metal, ceramic and plastic.
ENG905-1
Noise
The typical A-weighted noise level determined
according to EN60745:
Sound pressure level (L
pA
) : 82 dB (A)
Sound power level (L
WA
) : 93 dB (A)
Uncertainty (K) : 3 dB (A)
Wear ear protection
ENG900-1
Vibration
The vibration total value (tri-axial vector sum)
determined according to EN60745:
Model DHP470
Work mode: impact drilling into concrete
Vibration emission (a
h,ID
) : 8.0 m/s
2
Uncertainty (K) : 1.5 m/s
2
Work mode: drilling into metal
Vibration emission (a
h,D
) : 2.5 m/s
2
or less
Uncertainty (K) : 1.5 m/s
2
Model DHP480
Work mode: impact drilling into concrete
Vibration emission (a
h,ID
) : 7.0 m/s
2
Uncertainty (K) : 1.5 m/s
2
Work mode: drilling into metal
Vibration emission (a
h,D
) : 2.5 m/s
2
or less
Uncertainty (K) : 1.5 m/s
2