operation manual

6
ENGLISH (Original instructions)
Explanation of general view
SPECIFICATIONS
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
ENE020-1
The tool is intended for sawing wood, plastic and ferrous
materials.
General Power Tool Safety
Warnings GEA010-1
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
CORDLESS RECIPRO SAW
SAFETY WARNINGS GEB048-2
1. Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring. Cutting
accessory contacting a “live” wire may make exposed
metal parts of the power tool “live” and could give the
operator an electric shock.
2. Use clamps or another practical way to secure and
support the workpiece to a stable platform. Holding
the work by hand or against your body leaves it
unstable and may lead to loss of control.
3. Always use safety glasses or goggles. Ordinary
eye or sun glasses are NOT safety glasses.
4. Avoid cutting nails. Inspect workpiece for any
nails and remove them before operation.
5. Do not cut oversize workpiece.
6. Check for the proper clearance beyond the
workpiece before cutting so that the blade will not
strike the floor, workbench, etc.
7. Hold the tool firmly.
8. Make sure the blade is not contacting the
workpiece before the switch is turned on.
9. Keep hands away from moving parts.
10. Do not leave the tool running. Operate the tool
only when hand-held.
11. Always switch off and wait for the blade to come
to a complete stop before removing the blade from
the workpiece.
1. Red indicator
2. Button
3. Battery cartridge
4. Star marking
5. Indicator lamps
6. Check button
7. Lock-off button
8. Lock-off lever
9. Switch lever
10. Switch trigger
11. Lamp
12. Hex wrench
13. Hex bolt
14. Loosen
15. Recipro saw blade
16. Blade clamp sleeve
17. Saw blade
18. Bolt
19. Tighten
20. Hole for recipro saw blade
21. Blade clamp
22. Hole for jig saw blade
23. Protrusion
Model DJR143 DJR145 DJR183 DJR185
Length of stroke 13 mm
Strokes per minute (min
-1
) 0 - 3,000
Max. cutting capacities
Pipe 50 mm
Wood 50 mm
Standard battery cartridge
BL1415/BL1415N/BL1430/
BL1430B/BL1440/BL1450/BL1460B
BL1815/BL1815N/BL1820/BL1820B/
BL1830/BL1830B/BL1840/BL1840B/
BL1850/BL1850B/BL1860B
Overall length
392 mm (with BL1415/BL1415N)
392 mm (with BL1815/BL1815N/
BL1820/BL1820B)
397 mm (with BL1430/BL1430B/
BL1440/BL1450/BL1460B)
398 mm (with BL1830/BL1830B/
BL1840/BL1840B/BL1850/
BL1850B/BL1860B)
Net weight
1.5 kg (with BL1415/BL1415N)
1.5 kg (with BL1815/BL1815N/BL1820/
BL1820B)
1.7 kg (with BL1430/BL1430B/
BL1440/BL1450/BL1460B)
1.8 kg (with BL1830/BL1830B/BL1840/
BL1840B/BL1850/BL1850B/BL1860B)
Rated voltage D.C. 14.4V D.C. 18V