User Manual

15 ENGLISH
3. Turn the bolt counterclockwise with the wrench.
1
2
3
►1. Mower blade 2. Wrench 3. Lumber
4. Remove the bolt, washer, mower blade in order.
1
2
3
►1. Mower blade 2. Washer 3. Bolt
For DLM461
1. Put the mower on its side so that the mowing
heightadjustinglevercomestotheupperside.
2. Turn the bolt counterclockwise with the wrench
while holding the base plate.
1
2
►1. Wrench 2. Base plate
3. Remove the bolt, washer, base plate in order.
1
2
3
►1. Base plate 2. Washer 3. Bolt
4. To remove the individual blade, turn the bolt coun-
terclockwise with the wrench while holding the base
plate.
1
2
3
►1. Base plate 2. Mower blade 3. Wrench
Installing the mower blade
To install the mower blade, take the removal procedure
in reverse.
WARNING: Install the blade carefully. It has
a top/bottom facing. Place the blade so that the
rotational direction arrow faces outward.
WARNING: Tighten the bolt clockwise rmly
to secure the blade.
WARNING: Make sure that the blade and all
the xing parts are installed correctly and tight-
ened securely.
WARNING: When you replace the blades,
always follow the instructions provided in this
manual.