Operation Manual

6
7. Volume/Tuning Control/Select knob
8. DC IN socket
9. AUX IN 1
10. LCD display
11. Soft bended rod antenna
12. Handle
13. Battery compartment (covering main battery pack)
14. Speaker
15. Battery compartment locker
16. Input terminal (AUX IN 2)
17. Main battery compartment
18. Micro USB port for software upgrade
19. Red indicator
20. Button
21. Battery cartridge
22. Supporting bar
Battery Installation
Note:
1. Pull out the battery compartment locker to release
battery compartment. (Fig. 2)
2. Insert the main battery pack to power radio. The
suitable battery packs for this radio listed as the
following table.
The following tables indicate the operating time on a single charge.
: Cluster battery
: Slide battery
3-1. Installing or removing Slide battery cartridge (Fig. 4)
• To install the battery cartridge, align the tongue on the
battery cartridge with the groove in the housing and slip
it into place. Always insert it all the way until it locks in
place with a little click.
• If you can see the red indicator on the upper side of the
button, it is not locked completely. Install it fully until the
red indicator cannot be seen. If not, it may accidentally
fall out of the tool, causing injury to you or someone
around you.
• Do not use force when installing the battery cartridge. If
the cartridge does not slide in easily, it is not being
inserted correctly.
Battery Cartridge Voltage AT SPEAKER
OUTPUT =
50mW + 50mW
unit: Hour
7.2 V 9.6 V 10.8 V 12 V 14.4 V 18 V
BL7010 Approx 4.5
PA09 PA12 PA14 PA18
Approx. 6.5
9050 1250 1450 1850
9051 1251 1452 1852
9100 1200 1420
BL1815
9120 BL1013 1220
BL1415
9100A 1200A
BL1815N Approx. 9.0
9102 1202 1422 1822
Approx. 10.0
9122 1222
BH1420
9102A 1202A
BH9020 BH1220
BH9020A BH1220C
9134 1234 1434 1834 Approx. 14.5
BH1427 Approx. 15.0
9135 1235 1435 1835
Approx. 17.01435F
BL1830
1235F
BL1430
BH9033 BH1233 BH1433
Approx. 18.0
BH9033A BH1233C
BL1440 BL1840 Approx. 24.0
WARNING:
Do not use two main batteries at the same time.