Instruction manual

Reversing switch action
The reversing switch changes the direction
of rotation.
Move the reversing switch lever to the
"FWD" position for clockwise rotation.
Move the reversing switch lever
to the
"REV" position for counterclockwise rota-
tion.
The switch trigger does not actuate if the
reversing switch lever
is in the neutral posi-
tion.
CAUTION
:
0 Before plugging in the tool, always check to see that the switch trigger actuates properly
0 Always check the direction of rotation before drilling.
0 Use the reversing switch lever only when the tool comes to a complete stop. Changing
When not operating the tool, keep the reversing switch lever in the neutral position.
.Pulling the trigger hard when the reversing switch lever
is in the neutral position can
and returns to the
"OFF" position when released.
the direction of rotation before the tool stops may ruin the tool.
cause switch breakage.
6