operation manual

4 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model: DTD153
Fastening capacities Machine screw 4 mm - 8 mm
Standard bolt 5 mm - 16 mm
High tensile bolt 5 mm - 14 mm
No load speed 0 - 3,400 min
-1
Impacts per minute 0 - 3,600 min
-1
Overall length 126 mm
Rated voltage D.C. 18 V
Battery cartridge BL1815, BL1815N, BL1820,
BL1820B
BL1830, BL1830B, BL1840,
BL1840B, BL1850, BL1850B,
BL1860B
Net weight 1.3 kg 1.5 kg
• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange
without notice.
• Specicationsandbatterycartridgemaydifferfromcountrytocountry.
• Weight,withbatterycartridge,accordingtoEPTA-Procedure01/2003
Intended use
Thetoolisintendedforscrewdrivinginwood,metal
and plastic.
Noise
ThetypicalA-weightednoiseleveldeterminedaccord-
ingtoEN60745:
Sound pressure level (L
pA
):96dB(A)
Sound power level (L
WA
):107dB(A)
Uncertainty(K):3dB(A)
WARNING: Wear ear protection.
Vibration
Thevibrationtotalvalue(tri-axialvectorsum)deter-
minedaccordingtoEN60745:
Workmode:impacttighteningoffastenersofthemaxi-
mumcapacityofthetool
Vibration emission (a
h
):13.0m/s
2
Uncertainty(K):1.5m/s
2
NOTE: Thedeclaredvibrationemissionvaluehasbeen
measured in accordance with the standard test method and
maybeusedforcomparingonetoolwithanother.
NOTE: Thedeclaredvibrationemissionvaluemayalsobe
usedinapreliminaryassessmentofexposure.
WARNING: Thevibrationemissionduringactual
useofthepowertoolcandifferfromthedeclaredemission
value depending on the ways in which the tool is used.
WARNING: Besuretoidentifysafetymeasurestopro-
tecttheoperatorthatarebasedonanestimationofexposure
intheactualconditionsofuse(takingaccountofallpartsofthe
operatingcyclesuchasthetimeswhenthetoolisswitchedoff
and when it is running idle in addition to the trigger time).
EC Declaration of Conformity
For European countries only
TheECdeclarationofconformityisincludedasAnnexA
to this instruction manual.
SAFETY WARNINGS
General power tool safety warnings
WARNING: Read all safety warnings and
all instructions. Failuretofollowthewarningsand
instructionsmayresultinelectricshock,reand/or
seriousinjury.
Save all warnings and instruc-
tions for future reference.
Theterm"powertool"inthewarningsreferstoyour
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Cordless impact driver safety
warnings
1. Hold power tool by insulated gripping sur-
faces, when performing an operation where
the fastener may contact hidden wiring.
Fastenerscontactinga"live"wiremaymake
exposedmetalpartsofthepowertool"live"and
could give the operator an electric shock.
2. Always be sure you have a rm footing.
Be sure no one is below when using the tool in
high locations.
3. Hold the tool rmly.