User Manual

4 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model: DTD170
Fastening capacities Machine screw 4 mm - 8 mm
Standard bolt 5 mm - 16 mm
High tensile bolt 5 mm - 14 mm
No load speed Max impact mode 0 - 3,600 min
-1
Hard impact mode 0 - 3,200 min
-1
Medium impact mode 0 - 2,100 min
-1
Soft impact mode 0 - 1,100 min
-1
T mode 0 - 3,600 min
-1
Impacts per minute Max impact mode 0 - 3,800 min
-1
Hard impact mode 0 - 3,600 min
-1
Medium impact mode 0 - 2,600 min
-1
Soft impact mode 0 - 1,100 min
-1
T mode 0 - 2,600 min
-1
Rated voltage D.C. 18 V
Battery cartridge BL1815, BL1815N, BL1820,
BL1820B
BL1830, BL1830B, BL1840,
BL1840B, BL1850, BL1850B,
BL1860B
Overall length 117 mm
Net weight 1.2 kg 1.5 kg
• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange
without notice.
• Specicationsandbatterycartridgemaydifferfromcountrytocountry.
• Weight,withbatterycartridge,accordingtoEPTA-Procedure01/2003
Intended use
The tool is intended for screw driving in wood, metal
and plastic.
Noise
ThetypicalA-weightednoiseleveldeterminedaccord-
ingtoEN60745:
Sound pressure level (L
pA
):98dB(A)
Sound power level (L
WA
):109dB(A)
Uncertainty(K):3dB(A)
WARNING: Wear ear protection.
Vibration
The vibration total value (tri-axial vector sum) deter-
minedaccordingtoEN60745:
Workmode:impacttighteningoffastenersofthemaxi-
mum capacity of the tool
Vibration emission (a
h
):12.5m/s
2
Uncertainty(K):1.5m/s
2
NOTE: The declared vibration emission value has
been measured in accordance with the standard test
method and may be used for comparing one tool with
another.
NOTE: The declared vibration emission value
may also be used in a preliminary assessment of
exposure.
WARNING: The vibration emission during actual
use of the power tool can differ from the declared
emission value depending on the ways in which the
tool is used.
WARNING: Be sure to identify safety measures
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it is
running idle in addition to the trigger time).
EC Declaration of Conformity
For European countries only
TheECdeclarationofconformityisincludedasAnnexA
to this instruction manual.