Instructions

8 ENGLISH
Changing the application mode
Changing the impact force
You can change the impact force in four steps: 4 (max), 3 (hard), 2 (medium), and 1 (soft).
This allows a tightening suitable to the work.
 .

NOTE:-
ton
or .
Fig.7
Application mode
(Impact force grade
displayed on panel)
Maximum blows Purpose Example of application
4 (Max)
4,000 min
-1
(/min) Tightening with the maximum force
and speed.
Assembling steel frames and tighten-
ing long screws or bolts.
3 (Hard)
3,400 min
-1
(/min) Tightening with less force and speed
than Max mode (easier to control than
Max mode).
Assembling steel frames.
2 (Medium)
2,600 min
-1
(/min) 
needed.
Assembling or disassembling scaf-
folds and frameworks.
1 (Soft)
1,800 min
-1
(/min) Tightening with less force to avoid
screw thread breakage.
Assembling furniture.
: The lamp is on.
NOTE: When none of the lamp on the panel is lit, pull the switch trigger once before pressing the button
.
NOTE:󰀨
