User Manual

13
ASSEMBLY
CAUTION:
• Always be sure that the tool is switched off and the
battery cartridge is removed before carrying out any
workonthetool.
Blowing (Fig. 4)
Fordebrisblowing,attachgardennozzletobloweroutlet,
turningclockwisetolockitinplace.
Toremovethegardennozzle,turnitcounterclockwise.
OPERATION
Blowing (Fig. 5)
Hold the blower rmly with a hand and perform the
blowingoperationbymovingitaroundslowly.
Whenblowingaroundabuilding,abigstoneoravehicle,
directthenozzleawayfromthem.
Whenperformingan operation in corner,startfrom the
cornerandthenmovetowidearea.
MAINTENANCE
CAUTION:
• Always be sure that the tool is switched off and the
battery cartridge is removed before attempting to
performinspectionormaintenance.
• Never use gasoline, benzine, thinner, alcohol or the
like.Discoloration,deformationorcracksmayresult.
Cleaning (Fig. 6)
Fromtimetotime,wipeofftheoutsideofthetoolusinga
clothdampenedinsoapywater.
To maintain product SAFETY and RELIABILITY,
repairs,anyothermaintenanceoradjustmentshouldbe
performedbyMakitaAuthorizedServiceCenters,always
usingMakitareplacementparts.
OPTIONAL ACCESSORIES
CAUTION:
• These accessories or attachments are recommended
forusewithyourMakitatoolspeciedinthismanual.
Theuseofanyotheraccessoriesorattachmentsmight
presentariskofinjurytopersons.Onlyuseaccessory
orattachmentforitsstatedpurpose.
If you need any assistance for more details regarding
theseaccessories,askyourlocalMakitaServiceCenter.
• Nozzle
• Longnozzle
• Gardennozzle
• Makitagenuinebatteryandcharger
NOTE:
• Some items in the list may be included in the tool
packageasstandardaccessories.Theymaydifferfrom
countrytocountry.
ENG905-1
Noise
ThetypicalA-weightednoiseleveldeterminedaccording
toEN60745,EN15503:
Soundpressurelevel(L
pA
):85dB(A)
Soundpowerlevel(L
WA
):95dB(A)
Uncertainty(K):3dB(A)
ENG900-1
Vibration
Thevibrationtotalvalue(tri-axialvectorsum)determined
accordingtoEN60745,EN15503:
Workmode:operationwithoutload
Vibrationemission(a
h
):2.5m/s
2
orless
Uncertainty(K):1.5m/s
2
ENG901-1
• The declared vibration emission value has been
measuredinaccordancewiththestandardtestmethod
andmaybeusedforcomparingonetoolwithanother.
• The declared vibration emission value may also be
usedinapreliminaryassessmentofexposure.
WARNING:
• Thevibrationemissionduringactualuseofthepower
tool can differ from the declared emission value
dependingonthewaysinwhichthetoolisused.
• Be sure to identify safety measures to protect the
operatorthatarebasedonanestimationofexposurein
theactualconditionsofuse(takingaccountofallparts
oftheoperatingcyclesuchasthetimeswhenthetool
isswitchedoffandwhenitisrunningidleinadditionto
thetriggertime).
EC DECLARATION OF CONFORMITY
ForEuropeancountriesonly
TheECdeclarationofconformityisincludedasAnnexA
tothisinstructionmanual.