User Manual

5
ENGLISH (Original instructions)
Explanation of general view
1-1. Red indicator
1-2. Button
1-3. Battery cartridge
2-1. Star marking
3-1. Battery indicator
4-1. Lock-off button
4-2. Switch trigger
5-1. Front hand guard
5-2. Lock
5-3. Unlock
6-1. Adjusting screw
8-1. Sprocket cover
8-2. Lever
9-1. Adjusting dial
10-1. Sprocket
11-1. Adjusting pin
12-1. Hole
12-2. Guide bar
13-1. Sprocket cover
13-2. Lever
14-1. Sprocket cover
14-2. Lever
15-1. Loosen
15-2. Tighten
15-3. Adjusting dial
15-4. Guide bar
15-5. Saw chain
16-1. Sprocket cover
16-2. Lever
18-1. Oil tank cap
18-2. Oil inspection window
( for refilling the tank with oil)
18-3. Oil inspection window
20-1. Spike bumper
28-1. Felling area
31-1. Felling direction
31-2. Danger zone
31-3. Escape route
32-1. Guide bar cover
32-2. Battery cover
34-1. Cutting length
34-2. Distance between cutting edge
and depth gauge
34-3. Minimum 3 mm
35-1. Side plate angle
40-1. Slotted screwdriver
41-1. Sprocket
41-2. Locking ring
42-1. Locking ring
42-2. Sprocket
43-1. Limit mark
44-1. Brush holder cap
44-2. Screwdriver
SPECIFICATIONS
Model DUC252 DUC302
Guide bar length 250 mm 300 mm
Cutting length 23 cm 24 cm 28 cm
Standard guide bar
Type Sprocket nose bar Carving bar Sprocket nose bar
Type 91PX 25AP 90PX
Pitch 9.5 mm (3/8") 6.35 mm (1/4") 9.5 mm (3/8")
Gauge 1.3 mm (0.05") 1.3 mm (0.05") 1.1 mm (0.043")
Standard saw chain
No. of drive links 40 60 46
Number of teeth 6 9 6
Sprocket
Pitch 9.5 mm (3/8") 6.35 mm (1/4") 9.5 mm (3/8")
Overall length (without guide bar) 316 mm
*1 4.1 kg
Net weight
*2 4.6 kg 4.7 kg
Chain speed per minute 8.3 m/s (500 m/min)
Chain oil tank volume 85 cm
3
Rated voltage D.C. 36 V D.C. 36 V
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
*1 Weight, with largest battery cartridge, without guide bar and chain, empty oil tank, according to EN ISO 11681-2.
*2 Weight, with battery cartridge, guide bar, and chain, filled oil tank, according to EPTA-Procedure 01/2003.
WARNING: Use appropriate combination of the guide bar and saw chain. Otherwise personal injury may result.