User Manual

2
ENGLISH (Original instructions)
SPECIFICATIONS
Model DUH481 DUH483 DUH521 DUH523
Blade length 480 mm 520 mm
Strokes per minute (min
-1
) 1,350
Rated voltage D.C. 14.4 V D.C. 18 V D.C. 14.4 V D.C. 18 V
Overall length 869 mm 881 mm 873 mm 888 mm 919 mm 931 mm 923 mm 938 mm
Net weight 2.9 kg 3.1 kg 3.0 kg 3.2 kg 3.0 kg 3.2 kg 3.0 kg 3.3 kg
Battery cartridge
BL1415/
BL1415N
BL1430/
BL1440
BL1815/
BL1815N/
BL1820
BL1830/
BL1840/
BL1850
BL1415/
BL1415N
BL1430/
BL1440
BL1815/
BL1815N/
BL1820
BL1830/
BL1840/
BL1850
Battery charger DC18RC,DC18SD
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
END013-3
Symbol
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･ Read instruction manual.
･ Do not expose to rain.
･ Only for EU countries
Do not dispose of electric equipment or
battery pack together with household
waste material!
In observance of European Directive
2012/19/EU on waste electric and
electronic equipment, 2006/66/EC on
batteries and accumulators and waste
batteries and accumulators and their
implementation in accordance with
national laws, electric equipment and
battery pack that have reached the end
of their life must be collected separately
and returned to an environmentally
compatible recycling facility.
ENE014-1
Intended use
The tool is intended for trimming hedges.
ENG905-1
Noise
The typical A-weighted noise level determined
according to EN60745:
Model DUH481,DUH483,DUH521
Sound pressure level (L
pA
) : 75 dB (A)
Uncertainty (K) : 2.5 dB (A)
The noise level under working may exceed 80 dB (A).
Model DUH523
Sound pressure level (L
pA
) : 77 dB (A)
Uncertainty (K) : 2.5 dB (A)
The noise level under working may exceed 80 dB (A).
Wear ear protection
ENG900-1
Vibration
The vibration total value (tri-axial vector sum)
determined according to EN60745:
Work mode : hedge trimming
Vibration emission (a
h
) : 2.5 m/s
2
or less
Uncertainty (K) : 1.5 m/s
2
ENG901-1
•
The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
• The vibration emission during actual use of the
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
• Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
Cd
Ni-MH
Li-ion