User Manual
15 ENGLISH
FUNCTIONAL DESCRIPTION
CAUTION: Always be sure that the tool is
before adjusting or checking function on the tool.
Using the tool as cordless hedge trimmer
installing the shear blades for hedge trimmer.
Installing or removing battery cartridge
CAUTION:
installing or removing of the battery cartridge.
CAUTION: Hold the tool and the battery car-
cartridge.
Fig.1: 1. Red indicator 2. Button 3.
while sliding the button on the front of the cartridge.
CAUTION: Always install the battery cartridge
fully until the red indicator cannot be seen. If not,
CAUTION: Do not install the battery cartridge
forcibly.
Indicating the remaining battery capacity
Only for battery cartridges with the indicator
Fig.2: 1. Indicator lamps 2. Check button
-
light up for a few seconds.
Indicator lamps Remaining
capacity
Lighted Blinking
75% to 100%
50% to 75%
25% to 50%
0% to 25%
Charge the
Indicator lamps Remaining
capacity
Lighted Blinking
malfunctioned.
NOTE: Depending on the conditions of use and the
NOTE:
Tool / battery protection system
Overload protection
the tool to become overloaded. Then turn the tool on to restart.
Overheat protection
Overdischarge protection
Switch action
WARNING: Before installing the battery car-
tridge into the tool, always check to see that the
switch trigger actuates properly and returns to
the "OFF" position when released.
WARNING: For your safety, this tool is
the tool from unintended starting. Never use the
tool if it starts when you pull the switch trigger
Makita Service Center for repairs.
WARNING: Never disable the lock function or
NOTICE: Do not pull the switch trigger forcibly
The switch
Fig.3: 1. Switch trigger 2.
switch trigger. Release the switch trigger to stop. The lock-