Operation Manual

9
ENGLISH (Original instructions)
Explanation of general view
SPECIFICATIONS
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbols
END010-4
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
.................... Take particular care and attention.
....... Read instruction manual.
................... Danger; be aware of thrown objects.
.................. Keep bystanders away.
................... Cutting means continues to run after
the motor is switched off.
................... Do not expose to moisture.
............. Only for EU countries
Do not dispose of electric equipment or
battery pack together with household
waste material!
In observance of the European
Directives, on Waste Electric and
Electronic Equipment and Batteries
and Accumulators and Waste Batteries
and Accumulators and their
implementation in accordance with
national laws, electric equipment and
batteries and battery pack(s) that have
reached the end of their life must be
collected separately and returned to an
environmentally compatible recycling
facility.
1. Red indicator
2. Button
3. Battery cartridge
4. Star marking
5. Indicator lamps
6. Check button
7. Lock-off button
8. Switch trigger
9. Indication lamp
10. Change lever
11. Protrusion on base frame
12. Base frame
13. Shear blades
14. Blade cover
15. Blade frame
16. Groove
17. Locking lever
18. Undercover
19. Press
20. Turn
21. Shear blade
22. Crank
23. Basic alignment line on the tool
housing
24. Pins
25. Recessed part of crank
26. Apply grease
27. Base plate
28. Hole in the base plate of shear
blades
29. Oval holes that are overlapped
30. Groove in the undercover
31. Brush
32. Machine oil
33. Hedge shear blade
34. Hedge shear blade cover
35. Storage case
36. Bent part of the base plate of
shear blades
37. Screws
38. Grass shear blade cover
39. Grass shear blade
40. Trimming direction
41. Tilt the blades
42. Hedge surface to be trimmed
43. String
44. Clamping nuts
45. Chip receiver
46. Screws on the shear blades
47. Blade cover to be always installed
before installing the chip receiver
48. Hook hole
Model DUM166 DUM168
Effective cutting width 160 mm
Stroke per minute (min
-1
)1,250
Rated voltage D.C. 14.4 V D.C. 18 V
Battery cartridge BL1415/BL1415N
BL1430/BL1440/
BL1450
BL1815/BL1815N/
BL1820/BL1820B
BL1830/BL1840/
BL1840B/BL1850/
BL1850B
Dimensions (L x W x H)
335 mm x 176 mm
x 130 mm
350 mm x 176 mm
x 130 mm
337 mm x 176 mm
x 130 mm
353 mm x 176 mm
x 130 mm
Net weight 1.3 kg 1.5 kg 1.4 kg 1.6 kg
Battery charger DC18RC, DC18SD
(Optional accessory)
Blade length of optional hedge shear
blades
200 mm
Cd
Ni-MH
Li-ion