Operation Manual

7
ENGLISH (Original instructions)
Explanation of general view
SPECIFICATIONS
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
ENG901-1
• The declared vibration emission value has been
measured in accordance with the standard test method
and may be used for comparing one tool with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
• The vibration emission during actual use of the power
tool can differ from the declared emission value
depending on the ways in which the tool is used.
• Be sure to identify safety measures to protect the
operator that are based on an estimation of exposure in
the actual conditions of use (taking account of all parts
of the operating cycle such as the times when the tool
is switched off and when it is running idle in addition to
the trigger time).
Symbols
END229-1
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
....................... Take particular care and attention.
............ Read instruction manual.
...................... Danger; be aware of thrown objects.
...................... The distance between the tool and
bystanders must be at least 15 m.
1. Battery cartridge
2. Lock-off lever
3. Switch trigger
4. Power lamp
5. Main power button
6. Reverse button
7. Hanger
8. Grip
9. Protector (cutting tool guard)
10. Red indicator
11. Button
12. Battery indicator
13. Check button
14. Most effective cutting area
15. Hex bolt
16. Cover
17. Clamp
18. Cutter
19. Bolt
20. Nylon cutting head
21. Metal guard
22. Receive washer
23. Hex wrench
24. Plastic blade
25. Nut
26. 80-100 mm
Model DUR364L
Type of handle Loop handle
No load speed 5,000/6,500 min
-1
Overall length 1,754 mm
Nylon cord diameter 2.0 – 2.4 mm
Applicable cutting tool Nylon cutting head Plastic blade Nylon cutting head Plastic blade
Cutting blade diameter 350 mm 255 mm 350 mm 255 mm
Rated voltage D.C. 36 V
Net weight 4.0 kg 3.9 kg 4.5 kg 4.4 kg
Standard battery cartridge BL1815N/BL1820 BL1830/BL1840/BL1850
Noise
Sound pressure level average Sound power level average
Applicable
standard
L
PA
(dB (A)) L
WA
(dB (A))
Uncertainty K
(dB (A))
Nylon cutting head 81 89 0.3
2000/14/EC
Plastic blade 83 92 0.3
Vibration
Left hand Right hand
Applicable
standard
a
h
(m/s
2
)
Uncertainty K
(m/s
2
)
a
h
(m/s
2
)
Uncertainty K
(m/s
2
)
Nylon cutting head 2.5 1.5 2.5 1.5
EN786
Plastic blade 2.5 1.5 2.5 1.5