User Manual

Fig.19

Wind all but about 100 mm of the cords, leaving the

ends temporarily hooked through a notch on the side of

the spool.

Fig.20

Mount the spool on the cover so that the grooves and

protrusions on the spool match up with those on the

cover. Now, unhook the ends of the cord from their

temporary position and feed the cords through the

eyelets to come out of the cover.

Fig.21

Align the protrusion on the underside of the cover with

the slots of the eyelets. Then push the cover firmly onto

the housing to secure it. Make sure the latches fully

spread in the cover.

Replacing the blade for plastic blade

Fig.22

Replace the blade when it is worn out or broken.

To maintain product SAFETY and RELIABILITY, repairs,

any other maintenance or adjustment should be

performed by Makita Authorized Service Centers,

always using Makita replacement parts.